The TR 80 LCD Cartridge Hot-Spray-System consists of the TR 80 LCD Cartridge gun and the stand with pressure regulator and manometer.
The TR 80 LCD is a hot-melt adhesive spray system. Spray application is a non-contact glue application, which means it goes easy on the materials that are about to be glued. Also, spray application allows covering great areas and using very little glue. A stand for storing with built in pressure regulator and manometer is part of the system and permanently attached to the glue gun TR 80 LCD, so setting the right glue output and spray pattern becomes very easy. The hot-melt adhesive is extruded through air pressure. Pneumatic glue guns increase work speed and simplify exact dosing of the glue. Thanks to the built in electronic temperature regulation, the glue gun is ready to work within 3 - 10 minutes. Furthermore, it keeps the temperature on a constant level thus is a perfect suit for processing temperature-sensitive hot-melt glue.
A LCD-display and push-buttons allow a precise temperature adjustment. This way, the user always knows the current temperature of the glue applicator and is able to apply the glue at the intended temperature. The spray applicator uses 310 ml aluminium hotmelt glue cartridges, which for instance can contain PUR-hot-melt adhesive or POR-hot-melt glue. The cartridges can be swapped easy and hassle-free. The optional cartridge pre-heater KVG heats up the glue before use and increases the possible glue output per hour. A cartridge glue gun in combination with empty cartridges lets you test and process different hotmelts within a short period of time. This is especially useful forworking in laboratories or when qualifying a new hot-melt adhesive for a big production line.
Technical data
Type
TR 70 LCD
TR 80 LCD
Power supply
230 V / 50 Hz
230 V / 50 Hz
Consumption
600 W / 2.6 Ah
650 W / 2.8 Ah
Temperature controle
Electronic
Electronic
Temperature adjustment
50 – 210°C*
50 – 210°C*
Temperature precision
± 2°C
± 2°C
Temperature read-out
digital
digital
Heating time
± 3 - 10 min. **
± 3 - 10 min. **
Degree of protection
I
I
Class of protection
IP 30
IP 30
Weight
1.400 gr
1.400 gr
Operation
Pneumatic / 0.5 - 6 bar
Pneumatic / 0.5 - 6 bar
Length of electric cord
8.5m
4.5m
Glue application
Lines or dots
Spray/Swirl
Recommend melts
310 ml hot melt cardridges
310 ml hot melt cardridges
* Adjustable temperature, through which a great variety of hot melt glues can be worked with. This hot melt guns are also available on special request in High Temperature versions (50 - 235°C or 250°C) ** Depending on the hotmelt in use.
We only use cookies for a correct operation of our web shop. If you continue to browse our website without changing your web-browser cookie settings, you are agreeing to our use of cookies.
