Sold - Nordson 2302 hotmelt unit

This Nordson 2302 hot melt unit is in as new condition, check the pictures to convince yourself.
Next to its excellent condition, the unit has also been modernised regarding the glue pump.
The original pumps were normally quite noisy.
This unit has been equiped with a modern pump with electronic switch over, which barely makes any noise.
With its 8 kg tank content and two hose connections it is an ideal hot melt unit to combine with a hose and handgun.
We can deliver such a set, but also for the hot melt glue itself you are at the right address.

Technical data

Viscosity Range : 1,000 to 30,000 centipoise
Tank Volume* (to top flange) :520 in” (8,521 cm3)
Tank Capacity* (to top flange) : 18.7 Ibs (8.5 kg)
System Melt Rate** : 20.0 Ib/hr (9.1 kg/hr)
Maximum lnstanteous Pumping Rate* : 72.0 Ib/hr (32.7 kg/hr)
Tank Heating Method : Cast-in resistive heating element
Ambient Temperature Range : 32 to 120°F (0 to 50°C)
Operating Temperature Range : 220 to 400°F (105 to 205°C)
Temperature Control Stability: +/- 1°F (+/- 0.5°C)
Recommended Pump Operating Air Pressure : 10 to 60 psi (69 to 414 kPa)
Number of Hoses per Unit: 2

* depending on the hot melt glue in use