Sold - Robatech Concept B5/2 with integrated glue pattern controller ICS TRM 4

Robatech Concept B5/2 with integrated glue pattern controller ICS TRM 4.
This unit from is in excellent condition and only has been used a couple of hours for a demo.
The hot melt unit has been extendedly tested and is also serviced.
Will be delivered with 3 months warranty, at purchase within the EU.

Tank content 5 litres (305 in3)
Tank opening 150 x 110 mm
Melting rate per hour (approx.) 5 kg (11 lb)
Number of feed pumps 1
Piston pump type: KPC 12 (standard)
Heated hoses / Applicator heads: 2
Working temperature 20…210° C (68…410° F), tolerance ± 0.5° C
Operating voltage: 400 Volt AC, 3LNPE, max. 16A or
Power consumption basic unit: 1.800 Watt
Ambient temperature: 0…45° C (32…113° F)
Weight (with KPC12): 34 kg (75 lb) 44
Safety: Temperature protection, emergency stop input, program flow monitoring, pressure release tap
Interfaces: 7 outputs and 12 inputs, freely configurable signal assignment
Pumping rate per hour 5…50 kg (11…110 lb)
Feed pressure max. 30 bar (435 psi) max
Adhesive viscosity (approx. value) 100…20,000 mPas
Air supply 6 bar (87 psi), not oiled, cleaned6 bar, switched via emergency stop of the machine
Air consumption max. 11.4 l/min