• Nederlands taalpakket
  • English

Special offer

Hotmelt Granulate gun

€ 440,-
incl. a standard nozzle
and a fine tip nozzle

Info: Your browser does not accept cookies. If you want to put products into your cart and purchase them you need to enable cookies.

Mini module

Mini module

With a common hotmelt module, opening and closing will be done within the module by a needle.

Through which allways a little bit of glue remains in the nozzle itself.

Depending on the thickness of the used glue, there is a chanche that this leads to dripping.

Offcourse a lot also depends on the diameter of the nozzle.


With a mini module, the nozzle is integrated within the module itself and the needle closes and opens directly at the nozzle outlet. Through this no glue remains and dripping is brought to a absolute minimum.


Please note! Dripping of glue can have more reasons, see our faq section for more info. 

Description DiameterPriceQuantity
Minimodule 0.018 inch - 0.45 mm€220,00 
Minimodule 0.016 inch - 0.40 mm€220,00 
Minimodule 0.012 inch - 0.30 mm€220,00 
Minimodule 0.014 inch - 0.35 mm€220,00 
Minimodule 0.020 inch - 0.50 mm€220,00 
Minimodule 0.024 inch - 0.60 mm€220,00 
Minimodule 0.035 inch - 0.90 mm€220,00